A printer connected to our HP 3000 received a "non-character" input and stopped printing. The spooler was told to stop in order for the queue to be closed and restarted. When we do a show command on that spooler, it reports " *STOP .......CLOSING CONN " How do I force a close on the connection? The HP 3000 is used so much it can't really be shut down any time soon.
Tracy Johnson says
If it is a network printer, just "create" another LDEV with the same IP. The 3000 doesn't care if you have more than one LDEV to the same IP (or DNS). Raise the outfence on the original LDEV. Once created, do a SPOOLF of any old spool files on that LDEV to the new LDEV. You can do it in a job that reschedules itself if it persists. The first spool file still in a print state will probably be stuck, but this technique should fix subsequent spool files. The situation probably won't go away until the next reboot.
We've had our full backup on Friday nights abort several times and are not really able to discern why; sometimes it works while other times it doesn't. As a test/fix, we're swapping out the “not very old DLT tape” for a brand new DLT tape to see if that makes a difference. Our daily, partial backups work just fine—each day has its own tape.
Mark Ranft says
Let's talk tapes. How old are these unused new tapes? From my experience, new tapes and old tapes both have issues. I would not call a tape that was manufactured years ago, but hasn't been used, "New." It is still an old tape. But an unused tape will have microscopic debris from the manufacturing process. It may work just fine, but be prepared for more frequent cleaning if you are using unused tapes.
Old tapes are tried and true. That is, until they start stretching and wearing from overuse. If it was my STORE that failed, I would start by cleaning the drive. And cleaning cartridges can only be used a specific number of times. That is why they come with the check off label. After the allowed number of cleanings, you can put them in the drive but they don't do anything.
I was told by a trusted CE friend that cleaning a drive three times is sometimes necessary to get it working again. I don't know the science behind it, but that process did seem to save my behind more than once. After cleaning, do a small test backup and a VSTORE. Try to read (VSTORE) an old tape.