« Wayback Wed: Sizable drives for 3000s | Main | Taking a Stab at the Size of Your World »

April 12, 2019

Fine-Tune: Creating Store to Disc from tape

NewsWire Classic

I still have some 3000 information on a tape. I’d like to create a Store to Disc file with it — how do I do that?

Jack Connor replies:

There are several solutions. The first and easiest is to simply restore the info to a system (RESTORE *T;/;SHOW;CREATE;ACCOUNT=WORKSTOR) where WORKSTOR is an account you create to pull the data in.

Then a simple FILE D=REGSFILE;DEV=DISC and STORE /WORKSTOR/;*D; with whatever else should create the disc store.

The second method is to use FCOPY. You'll have to research the STORE format, but I believe it's FILE TAPEIN;DEV=TAPE;REC=8192,,U,BINARY.

The third (also easy, but you need the software) is to use Allegro's tool TAPECOPY, which moves from tape store to disc store and back.

John Pitman adds:

Do you mean copy it off tape to a disk store file? I’m not sure if that can be done, as in my experience of tapes, there is a file mark between files, and EOT is signified by multiple file marks in a row... but anything may be possible. If you do a file equate and FCOPY as shown below, you should be able to look at the raw data, and it should show separate files, after a file list at the front.

FILE TX;DEV=TAPE;REC=32767
FCOPY
FROM=*TX;TO=;CHAR;FILES=ALL

Here is our current store command, and the message it provokes. MAXTAPEBUF speeds it up somewhat

STORE  !INSTOREX.NEW.STOCK2K;*DDS777;
FILES=100000;DIRECTORY;MAXTAPEBUF

04:52 PM in Hidden Value, Newswire Classics | Permalink

Bookmark and Share

Use our search engine to find 20 years
of HP 3000 news and articles

Comments

Comments

The comments to this entry are closed.